DIY - Using a rotary leather punch for earrings

Using a rotary leather punch for earrings

What do you need:

Stud earrings

Polymer clay pendants

Superglue

Round-nose pliers

Rotary leather punch

Pen

Step 1: Use a pen to mark dots where you want to make the holes. Leave enough space between them so the pendant doesn’t tear.

Step 2: Set the hole punch to 2 mm.

Step 3: Place the pin of the punch on the centre dot and press the tool in.

Step 4: Repeat this for all the dots. Carefully remove the punch each time to avoid tearing the pendant.

Step 5: Attach your desired charms and pendants.

Step 6: Glue the stud earring to the top part of the pendant and allow it to dry thoroughly.